For over 50 years, Morbark NZ’s heavy-duty sawmill chippers have set the standard in the industry. With a growing emphasis on chip quality and our commitment to innovation, we n ow offer five proven models with a wide range of options to meet all disc chipper requirements.
Sawmill Chippers
Auxiliary Equipment
- Drive packages with electric motors, pulleys, and belts
- Guarding and subbases for chipper and drive
- Infeed conveyors
- Blow pipes and cyclones tailored to application
Specifications Comparison
Compare models side by side
Specifications
48″ (122 cm)
58″ (147 cm)
66″ (167.6 cm)
Feed
Horizontal or gravity-feed (drop spout)
Horizontal or gravity-feed (drop spout)
Horizontal
Discharge
Top, End, Bottom, or Side
Top, End, Bottom, or Side
Top, End, Bottom, or Side
Knife configurations
2–6
2–6
2–8
Disc thickness
Standard 100 mm (4″) Optional 125 mm (5″)
Standard 100 mm (4″) Optional 125 mm (5″)
125 mm (5″) standard
Hood / Doors
Hinged hoods or doors for easy knife changes
Hinged hoods or doors for easy knife changes
Hinged hoods or doors for easy knife changes
Knife length
375 mm (14.75″)
500 mm (19.625″)
546 mm (21.5″)
Anvils
Carbide-inlaid
Carbide-inlaid
Carbide-inlaid
Feed Plate
Hard-chromed
Hard-chromed
Hard-chromed
Weight (kg)
3,730
3,730
5,000
Available Models / Sizes
Choose the perfect model for your needs
48″ (122 cm)
| Feed | Horizontal or gravity-feed (drop spout) |
| Discharge | Top, End, Bottom, or Side |
| Knife configurations | 2–6 |
| Disc thickness | Standard 100 mm (4″) Optional 125 mm (5″) |
| Hood / Doors | Hinged hoods or doors for easy knife changes |
| Knife length | 375 mm (14.75″) |
| Anvils | Carbide-inlaid |
| Feed Plate | Hard-chromed |
| Weight (kg) | 3,730 |
58″ (147 cm)
| Feed | Horizontal or gravity-feed (drop spout) |
| Discharge | Top, End, Bottom, or Side |
| Knife configurations | 2–6 |
| Disc thickness | Standard 100 mm (4″) Optional 125 mm (5″) |
| Hood / Doors | Hinged hoods or doors for easy knife changes |
| Knife length | 500 mm (19.625″) |
| Anvils | Carbide-inlaid |
| Feed Plate | Hard-chromed |
| Weight (kg) | 3,730 |
66″ (167.6 cm)
| Feed | Horizontal |
| Discharge | Top, End, Bottom, or Side |
| Knife configurations | 2–8 |
| Disc thickness | 125 mm (5″) standard |
| Hood / Doors | Hinged hoods or doors for easy knife changes |
| Knife length | 546 mm (21.5″) |
| Anvils | Carbide-inlaid |
| Feed Plate | Hard-chromed |
| Weight (kg) | 5,000 |
Enquire About Sawmill Chippers
Interested in this equipment? Fill out the form below and we'll get back to you shortly.