Morbark NZ Drum Debarkers
Morbark NZ’s in-house designed and manufactured line of Drum Debarkers delivers optimal bark removal with minimal fibre loss.
Debarkers
Specifications Comparison
Compare models side by side
Specifications
MODEL 640
Drum Debarkers
Diameter
2.7 to 3.5 metres
2.7 to 3.5 metres
Length
9 to 20 metres
9.0 to 20.0 metres
Capacity
150mm – 900mm
✓
Drive Power
75.0kw
✓
Auxiliary power
37.3kw
✓
Rubber-tyred support and drive wheel assemblies
✓
✓
Covered bark chutes
✓
✓
Central waste conveyors
✓
✓
Available Models / Sizes
Choose the perfect model for your needs
MODEL 640
Morbark 640 Debarker A multi-purpose debarker suitable for chip plants and sawmills, capable of handling both softwoods and hardwoods. It boasts the speed to debark small logs and the power to handle ...
Morbark 640 Debarker
A multi-purpose debarker suitable for chip plants and sawmills, capable of handling both softwoods and hardwoods. It boasts the speed to debark small logs and the power to handle larger ones. Featuring adjustable front and back yoke assemblies, operators can easily centre logs of varying diameters on the cutterhead. The infeed and outfeed conveyors are trough-type and available in different lengths, built from sturdy 12mm formed steel plate equipped with durable all-steel welded Ladder-type chains. Outfeed available as either full trough Tipping or Arm type kicker discharge.
Options
- Two types of Cutterhead
- Trough type infeed conveyors: 6.0 metres to 10.8 metres
- Trough type tilting outfeed conveyors: 7.2 metres to 12.0 metres
- Waste conveyors: 8.0 metres to 15.0 metres
- All-weather Operators Cab
- Joystick control
| Diameter | 2.7 to 3.5 metres |
| Length | 9 to 20 metres |
| Capacity | 150mm – 900mm |
| Drive Power | 75.0kw |
| Auxiliary power | 37.3kw |
| Rubber-tyred support and drive wheel assemblies | |
| Covered bark chutes | |
| Central waste conveyors |
Drum Debarkers
Morbark NZ’s in-house designed and manufactured line of Drum Debarkers delivers optimal bark removal with minimal fibre loss. Features: Matched, driven, chain-type log infeed and outfeed systems Po...
Morbark NZ’s in-house designed and manufactured line of Drum Debarkers delivers optimal bark removal with minimal fibre loss.
Features:
- Matched, driven, chain-type log infeed and outfeed systems
- Portable diesel units with chute-type infeeds also available
- Complete turnkey system
| Diameter | 2.7 to 3.5 metres |
| Length | 9.0 to 20.0 metres |
| Rubber-tyred support and drive wheel assemblies | |
| Covered bark chutes | |
| Central waste conveyors |
Enquire About Debarkers
Interested in this equipment? Fill out the form below and we'll get back to you shortly.